Raised Metal Pet Bowl with High Leg, 17cm Wide, 9.5cm High

This raised metal pet bowl is a high-leg, oblique pet tableware item made from melamine and 304 stainless steel. It measures L17 x W17.5 x H9.5cm and is available in two colour and pattern options: Retro Sweetheart and Striped Polka Dot. The raised high-leg shape lifts the bowl away from the floor, which can help keep the eating area tidier and make food or water easier for your pet to reach. The oblique slant means the bowl sits at an angle rather than flat, and the 17cm width gives cats and small dogs a comfortable opening to eat from. It is classed as pet tableware, so it suits daily feeding of dry food, wet food, or water. The package contains one pet bowl, and no stand, mat, or extra bowl is supplied unless stated. Because the source text does not give a capacity in millilitres, the external dimensions remain the clearest guide to size. The melamine outer shell carries the Retro Sweetheart or Striped Polka Dot pattern and gives the bowl a smooth, wipeable surface. The 304 stainless steel bowl section is a metal food-contact material, and no further coatings or seals are claimed. Hand washing with warm water and a mild detergent is the simplest care routine, followed by drying before refilling. The raised form is most useful if you want to keep the bowl off the floor or reduce the amount your pet has to lower its head, though the exact feeding height depends on your pet. This bowl is not suitable for very large dogs because the 17cm opening is sized for cats and small dogs. It is a straightforward, practical piece of pet tableware with two pattern choices and a metal-and-melamine construction. The measurements are given in centimetres, and the product type is a pet bowl, not a full feeding station. For buyers searching for a raised pet bowl, a high-leg oblique bowl, or melamine and stainless steel pet tableware, this listing matches those terms directly.

Features and Construction

The construction combines a patterned melamine outer layer with a 304 stainless steel bowl section, set into a high-leg oblique form. The result is a raised pet bowl that stands off the floor rather than resting flat. The size and materials are stated plainly, and the two colour options give a choice of pattern without changing the bowl's measurements.

Material and Build

The bowl is made from melamine and 304 stainless steel. Melamine forms the outer shell and carries the Retro Sweetheart or Striped Polka Dot design, giving a rigid surface that can be wiped clean. The 304 stainless steel section is the metal bowl part stated in the source text. There is no claim about rust resistance, heat resistance, or dishwasher safety, so those limits should be treated as unknown. The high-leg shape and oblique angle are part of the moulded form, not separate attachments.

Size and Practical Fit

The stated size is L17 x W17.5 x H9.5cm. That gives a 17cm wide opening and a 9.5cm height, which is a raised position for cats and small dogs. The 17.5cm depth from front to back gives the bowl a slightly longer footprint than its width. No capacity in millilitres or litres is given, so the external measurements are the only firm size guide. If you need a bowl for a large dog, the 17cm opening may be too small.

Uses and Placement

This pet bowl is intended for pet tableware use, meaning food or water service for cats and small dogs. The raised high-leg form and oblique angle suit placement on a flat floor where you want the bowl lifted rather than flat. It is a single bowl, so it works as a standalone feeding or water bowl rather than a full feeding station.

Event or Professional Use

In a cattery, small veterinary waiting area, or pet grooming space, a raised bowl can keep food or water off the floor and contained in one spot. The patterned melamine outer surface is easy to wipe between uses, and the two pattern options allow different bowls to be assigned to different areas. The source text does not state a capacity or a non-slip base, so stability and volume should be checked in person.

Everyday Home Use

At home, the high-leg oblique shape lifts the bowl to a raised height for cats and small dogs. The 17cm opening gives room for dry food, wet food, or water, and the 9.5cm height means it stands above the floor rather than sitting flush. Because no mat or stand is included, the bowl rests directly on the floor. Hand washing with warm water and a mild detergent is the simplest care method.

Benefits and Buying Value

The main practical value comes from the raised high-leg form, the oblique angle, and the combined melamine and 304 stainless steel build. The bowl is offered in two named patterns, Retro Sweetheart and Striped Polka Dot, so the choice is about pattern preference and the raised format rather than extra accessories. The measurement and material details are clear, which makes it easier to judge whether it fits your pet.

Reuse and Low Maintenance

The melamine outer shell and 304 stainless steel section can be hand washed with warm water and a mild detergent. The smooth patterned outer surface is straightforward to wipe after feeding. No dishwasher, microwave, or sterilising instructions are given, so those methods are not supported by the source text. Drying the bowl before refilling helps keep it ready for the next meal.

Why Choose This Product

Choose this bowl if you want a raised pet bowl with a high leg and oblique shape, sized at L17 x W17.5 x H9.5cm for cats and small dogs. Choose it if you prefer a melamine and 304 stainless steel build over a plain plastic bowl, and if you want a pattern choice between Retro Sweetheart and Striped Polka Dot. It is not a full feeding station and does not include a stand or mat. The listed measurements and materials are the full extent of the source data.