Adjustable Drill Stand for 43mm and 35mm Power Drills, 60mm Depth

This adjustable drill stand is a practical accessory for holding a power drill in a fixed, vertical position during bench or workshop tasks. It is designed for drills with a neck diameter of 43mm or 35mm, and it allows a drilling depth of up to 60mm. The stand has a total height of 400mm and a shaft diameter of 25mm. Its base is made from aluminium and measures 150 x 150mm, with grooves that can accept a machine vise. The crank and column are made from carbon steel. Two mounting holes are provided for securing the stand to a work surface. The stand is black and has an overall size of 42cm x 17cm x 7.5cm. It is intended for use in a store or at home, and it does not include drill bits, flat nose pliers, or wood.

Features and Construction

The stand is built around a carbon steel column and crank, with an aluminium base. It includes a depth gauge, a plastic neck insertion, an anchor hole, and an Allen wrench for support adjustment. These parts work together to hold a power drill steady while the user operates the crank to feed the drill into the workpiece.

Material and Build

The substrate is made from aluminium, which forms the 150 x 150mm base. This base has grooves for mounting a machine vise, allowing a workpiece to be secured separately from the drill stand. The crank and column are made from carbon steel. A plastic neck insertion is used where the drill neck fits into the stand. The stand also includes two mounting holes and an anchor hole. An Allen wrench is supplied for support adjustment. The combination of these materials and fittings provides the structure needed for bench drilling tasks.

Size and Practical Fit

The stand accepts power drills with a neck diameter of 43mm or 35mm. The drilling depth is up to 60mm, and the total height is 400mm. The shaft diameter is 25mm. The base measures 150 x 150mm, and the overall size is 42cm x 17cm x 7.5cm. These dimensions make the stand suitable for mounting on a workbench or similar surface where space is available for the base and the upright column. The depth gauge helps the user set the required drilling depth within the 60mm maximum.

Uses and Placement

This drill stand is intended for use in a store or at home. It is suited to situations where a power drill needs to be held vertically and fed into a workpiece with more control than freehand drilling allows. The stand can be fixed to a work surface using the two mounting holes, and the base grooves can hold a machine vise for clamping the workpiece.

Event or Professional Use

In a store or light workshop environment, the stand can be used for repetitive drilling where a consistent vertical position is required. The depth gauge and the crank allow the operator to control the feed and the drilling depth up to 60mm. The carbon steel column and crank provide the mechanical structure for this action, while the aluminium base offers a flat mounting surface. The stand can be secured with the mounting holes if a permanent or semi-permanent setup is needed.

Everyday Home Use

For home workshop tasks, the stand can hold a compatible power drill with a 43mm or 35mm neck. It allows the user to drill vertically without relying solely on hand control. The base can be placed on a bench, and the machine vise grooves can be used if a vise is available. The stand does not include drill bits, flat nose pliers, or wood, so these items must be provided separately. The overall size of 42cm x 17cm x 7.5cm should be considered when choosing a storage or mounting location.

Benefits and Buying Value

The main practical benefit of this drill stand is that it holds the drill in a fixed position, which can help with achieving more precise results than manual operation. It also includes useful adjustments such as the depth gauge and the support adjustment via the supplied Allen wrench. The aluminium base and carbon steel column and crank form the main structure.

Reuse and Low Maintenance

The stand is designed to be reused for multiple drilling tasks. Its materials are stated as aluminium for the substrate and carbon steel for the crank and column. The plastic neck insertion is a replaceable part in the fitting area. No specific maintenance instructions are provided in the source data, so general care should be based on keeping the stand clean and dry, and checking the fittings before use. The depth gauge and crank should be operated within the stated 60mm drilling depth.

Why Choose This Product

This adjustable drill stand is a suitable choice for users who need to hold a 43mm or 35mm neck power drill steady during bench work. It offers a 60mm maximum drilling depth, a 400mm total height, and a 150 x 150mm aluminium base with vise grooves. It includes two mounting holes, an anchor hole, a depth gauge, a plastic neck insertion, and an Allen wrench. The stand is black and measures 42cm x 17cm x 7.5cm overall. It does not include drill bits, flat nose pliers, or wood.